Leading Manufacturers through Product Compliance - Our Slogan

New List of Harmonised Construction Product Standards

The lists of harmonised standards on the European Commission’s website are frequently updated to include new or amended standards. These standards, when they appear on the list (formally known as the Official Journal) can, when applied in full, offer a presumption of conformity to the applicable CE Marking Directive. Usually the application of a harmonised standard can simplify the CE marking process, as the standard will not only try to set out best practice, but it will also remove some of the subjective parts often found within the essential requirements of the Directives.

Things, however, are a little different for construction products. Under the Construction Product Regulation, the manufacturer is only required to CE mark their product if a harmonised standard exists. As such, when the list of construction product harmonised standards is updated, it can have a significant impact on manufacturer’s who make, import or distribute products that fall within scope of these ‘new’ standards. Thankfully the list is not changed too often and was last updated on 28th June 2013, that was until 20th August 2014 when a new list appear in the Official Journal.

In total 22 ‘new’ standards that have entered onto the list, although the vast majority are the latest versions of the standards that have previously featured on the list. There is only just 5 brand new entries, so it might be worth casting your eye over the new additions to make sure one does not affect your products.

If you believe one of the new standards applies to your products, then we would recommend purchasing a copy of the standard and start to prepare for CE marking your product. There is no need to panic, as whilst the new list of harmonised standards has now been published, there is a transitional period which is given in the final two columns (most of which do not become mandatory until 8th August 2015).

The list of the 22 ‘new’ standards can be seen in the table below and full list of harmonised standards for construction products can be seen on the European Commission’s website (http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=uriserv:OJ.C_.2014.259.01.0001.01.ENG).

If you have any queries or require support with CE Marking, then please contact us on 01527 595066.

 

The ‘New’ Construction Product Standards:

 

Reference and title of the harmonised standard
(and reference document)

Reference of superseded standard

Date of applicability of the standard as a harmonised standard

Date of the end of the co-existence period Note 4

EN 845-1:2013 (new)
Specification for ancillary components for masonry – Part 1: Wall ties, tension straps, hangers and brackets

08/08/2014

08/08/2015

EN 845-2:2013 (new)
Specification for ancillary components for masonry – Part 2: Lintels

08/08/2014

08/08/2015

EN 845-3:2013 (new)
Specification for ancillary components for masonry – Part 3: Bed joint reinforcement of steel meshwork

08/08/2014

08/08/2015

EN 1344:2013 (new)
Clay pavers – Requirements and test methods

EN 1344:2002

08/08/2014

08/08/2015

EN 12566-3:2005+A2:2013 (new)
Small wastewater treatment systems for up to 50 PT – Part 3: Packaged and/or site assembled domestic wastewater treatment plants

31/12/2013

EN 12566-7:2013 (new)
Small wastewater treatment systems for up to 50 PT – Part 7: Prefabricated tertiary treatment units

08/08/2014

08/08/2015

EN 12602:2008+A1:2013 (new)
Prefabricated reinforced components of autoclaved aerated concrete

08/08/2014

08/08/2015

EN 13225:2013 (new)
Precast concrete products – Linear structural elements

08/08/2014

08/08/2015

EN 13808:2013 (new)
Bitumen and bituminous binders – Framework for specifying cationic bituminous emulsions

08/08/2014

08/08/2015

EN 14080:2013 (new)
Timber structures – Glued laminated timber and glued solid timber – Requirements

08/08/2014

08/08/2015

EN 14342:2013 (new)
Wood flooring and parquet – Characteristics, evaluation of conformity and marking

08/08/2014

08/08/2015

EN 14509:2013 (new)
Self-supporting double skin metal faced insulating panels – Factory made products – Specifications

EN 14509:2006

08/08/2014

08/08/2015

EN 14783:2013 (new)
Fully supported metal sheet and strip for roofing, external cladding and internal lining – Product specification and requirements

08/08/2014

08/08/2015

EN 14915:2013 (new)
Solid wood panelling and cladding – Characteristics, evaluation of conformity and marking

EN 14915:2006

08/08/2014

08/08/2015

EN 15037-4:2010+A1:2013 (new)
Precast concrete products – Beam-and-block floor systems – Part 4: Expanded polystyrene blocks

08/08/2014

08/08/2015

EN 15037-5:2013 (new)
Precast concrete products – Beam-and-block floor systems – Part 5: Lightweight blocks for simple formwork

08/08/2014

08/08/2015

EN 15286:2013 (new)
Agglomerated stone – Slabs and tiles for wall finishes (internal and external)

08/08/2014

08/08/2015

EN 15322:2013 (new)
Bitumen and bituminous binders – Framework for specifying cut-back and fluxed bituminous binders

08/08/2014

08/08/2015

EN 15382:2013 (new)
Geosynthetic barriers – Characteristics required for use in transportation infrastructure

08/08/2014

08/08/2015

EN 15501:2013 (new)
Thermal insulation products for building equipment and industrial installations – Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products – Specification

08/08/2014

08/08/2015

EN 15682-2:2013 (new)
Glass in building – Heat soaked thermally toughened alkaline earth silicate safety glass – Part 2: Evaluation of conformity/Product standard

08/08/2014

08/08/2015

EN 15683-2:2013 (new)
Glass in building – Thermally toughened soda lime silicate channel shaped safety glass – Part 2: Evaluation of conformity/Product standard

08/08/2014

08/08/2015

 

 


Comments are closed.

 
UKCA Support Services
Tel: 01564 792349
Email: info@ukcasupportservices.co.uk
-